MMC Industrial Division

Media:

Barrels & Drums

Moving product in bulk from one operation to another frequently requires a container in the form of a Barrel or Drum. Millard fabricates sanitary barrels and drums built specifically for moving ingredients from Loss-in-weight systems, Ribbon Blenders, Mixers, Hoppers, Augers, Cluster Breakers, general product transfers, temporary storage, etc. to further mixing and processing operations (e.g. Prefilling, Cooking, Final Processing). Our Barrels and Drums are built rugged using stainless steel and are typically sized in 55 gallon and 140 gallon.

Features:

Media:

Carts

We offer a variety of Carts (also known as Product Trucks) for the food processing industry to move not only food products but also non-food items essential in operating your facility. All our carts are made from heavy duty stainless steel and use the highest quality components and casters. We can build to your designs or work with you to custom design a solution.  When a catalog cart will not quite fit, call us and we can get you what you need.

Features:

Media:

Chutes & Slides

Moving food products, trays, containers, and any other item from one point to another is one of Millard's specialties.  We can custom design safe and sanitary Chutes and Slides to direct these items from Process to Process, from Machine to Machine, or connect to most Conveyors: Accumulating, Belt, Sanitary Belt, Bottle, Bulk Handling, Can, Case & Carton, Converging / Dividing, Cooling, Custom & Special, Floor to Floor, Food Handling, Freezing, Heavy Duty, Mesh Belt, Oven, Sorting, Stainless Steel, Empty Box, Full Box, Straight, Curved, Incline, Decline, S-shape, most any custom angle, and more. We can design and build most styles, shapes and sizes to suit your exact needs.

Features:

Media:

Ductwork

Millard can custom build most any Ductwork, scrubber ventilation, or venting hoods you need to fit your application. Applications vary from Heat removal, Exhaust, Ventilation, Cook Hoods, Steam Hoods, and more. Our Ductwork is available in Stainless Steel, Aluminum, Galvanized, or Carbon steel.  We have produced ducting in a variety of shapes, sizes, lengths and custom-fit configurations.  We provide the proper fit, drains, and flanges to make installation efficient and clean.

Features:

  • Material options: Stainless Steel, Aluminum, Galvanized, Carbon
  • Design, Build, and Install
  • Custom fit driven by your application
  • Options: Drains, Access ports, Flange Bolt joints, Flare joints, Seal Welded joints, Jacketed
  • Support Components: Hangers, Supports, Hoods, Vent Fans, Complex Transitions

Media:

F.A.T. (Factory Acceptance Testing)

Millard offers Factory Acceptance Testing (F.A.T.) on most of our products should you or the nature of the product require it.  We have over 100,000 sq.ft. of floor space within our facilities to physically accommodate and simulate most production operations.  Our facility is specifically set up with large assembly bays for not only our manufacturing versatility but also to support F.A.T.  We can help to make sure products function properly before they ship. 

Features:

Media:

Fabrication Services

Our Fabrication Services not only supports the food processing industries but also many others including; OEM, Pharmaceuticals, Public Works, Tooling Shops, Machine Shops, Corn Processing Plants, Ethanol Plants, Waste Water Facilities, Chemical Plants, Animal Health, and Private Business. Having a Metal Services Supplier at our disposal provides Millard with a unique advantage in getting most projects started quickly.  Millard has the knowledge, facilities, and engineering to work with you for all your fabricating needs.

Features:

Media:

Light Fabrication

Millard understands that many times the equipment and machinery alone will not complete a project and the missing links and/or gaps between processes and machines can be just as important. Millard fills those gaps and links your processes together with our Light Fabrication expertise derived over the years working with both food and non-food industries. We also have the advantage of an affiliated metal supplier, Millard Metal Services, Inc. right next door so your materials are on hand to get your project started quickly. Our vast experiences carry over through our services to provide you will a full solution.

Features:

  • Engineering Support from start to finish
  • Quick turnaround times
  • Creative solutions
  • Over 40 years of fabricating experience
  • Equipment and resources to handle most fabrication projects from large to small
  • S.S. Floor Drains, Pass Throughs, Trim, Drip Pans, Splash Shields, etc.

Media:

Millard PassPRO In-House Passivation

Millard PassPRO, our large "In-House" Passivation operation, is available for our customers' fabricated items. We place a high priority on Sanitation in both our designs and fabrication processes which is why we have incorporated this process as a standard and can be found in our "Safety and Sanitation Design Standards".   Passivation treatment is intended to improve the surface condition of stainless steel by dissolving iron that has been embedded in the surface during forming or machining. If allowed to remain, the iron can corrode and give the appearance of rust spots on the stainless steel.  Passivation restores the original corrosion-resistant surface by forming a thin, transparent oxide film.  Passivation is the preferred method for the sanitary durability of stainless steel.

Features:

Media:

Racks

Many operations need racks to store products, tooling, fixtures, supplies, or food grade ingredients.  Millard is experienced in engineering custom racks to fit your application, process, or layout.  We can Design, build, and install the racks as a pre-made unit, built-in-place, or modular components depending upon access and use.  Our Racks are stainless steel and made following our Safety and Sanitary Design Standards.

Features:

Media:

Raw Material Sales & Service

Millard Metal Services (MMS) is an affiliate of Millard Manufacturing Corp. and is a supplier of Stainless Steel, Aluminum, Carbon Steel, Galvanized Steel, Brass, Bronze, and Copper Alloys. Raw material is available in custom "cut-to-size" and standard stock sizes such as: Plate, Sheet, Bar, Angle, Pipe, Beams, Structural, Square & Round Tubing, Channel, Flat, Rounds, Half Round, Squares, Hexagon, Tee, Perforated, Threaded Rod, Expanded Metal, Grating, Threaded Rod, Metric, Textured and Custom ordered stock.  Having MMS as an affiliate provides us with a unique advantage to start your project quickly.  Single piece to truck load orders accepted. Most items are available in stock.

Features:

Media:

Safety Guarding

Millard knows the importance of Safety in the workplace and the value personnel bring to any company. We strive to provide safe products starting from design concepts through production, shipping, and installations. Safety Guarding is an inherent process for Millard when we take on any project and we incorporate the most modern Safety and Sanitary Design Standards. Safety Guarding examples: Chain Guards, Railings, Gates, Interlocks, PLC Interface options, Wash-down Area Containment, Rotating components, Chemical Containment, Robotic Work Zones, Product Zones, Custom Machines, and many more.

Features:

Media:

Tables

Millard can design, build, and install a wide variety of custom tables to meet your application needs.  Our tables are made to our Safety and Sanitary Design Standards that support the food industry. We can provide tables for (but not limited to): Processing, Sorting, Washing, Storage, Inspection, Cutting, and General use as well as Scale tables and most Worksurface applications.

Features:

Media:

Tanks

Millard is experienced in building Tanks (Non-Pressure Vessels) of all sizes and shapes for the food processing industry. From just a few gallons to a 10,000 gallon liquid tank, we can fill your tank needs. Heavy duty stainless steel is used on most applications but carbon steel is available for non-sanitary applications. We can engineer your tanks complete with inlet and outlet fittings, inspection ports, supports, and lifting eyes if needed.

Features:

Media:

Vacuum Accumulator

This Vacuum Accumulator Unit is used in dry sausage peeling applications where the peeled casing is vacuum conveyed to the chamber and held within until the load is dumped into a combo or trash bin at breaks. A typical unit holds 250 lbs. of expended casing material in a three-hour time frame and can easily discharge through the 40" diameter opening and rack/pinion gate assembly. The R.T.E. grade unit is designed for high cleanability and ease of use and can be custom designed to fit within your workspace.

Features: